一定牛彩票

财富热线:18681139818 QQ:13931677 Email:tjh@rjplastics.com China Plastics Physical Property Query Net | The Best Domestic Physical Property Query Net! Fortune Hotline: 18681139818 QQ: 13931677 Email: tjh@rjplastics.com
Beijing Chemical Institute PBT

        <dfn id='04dq9'><optgroup id='04dq9'></optgroup></dfn><tfoot id='04dq9'><bdo id='04dq9'><div id='04dq9'></div><i id='04dq9'><dt id='04dq9'></dt></i></bdo></tfoot>

        <ul id='04dq9'></ul>

        • China Property Search Network >> PPS >> PPS RTP 1305 P-1

          PPS RTP 1305 P-1

          Category: PPS Source: Ren Jie plastics updated: 2017-06-01 Add to Favorites

          RTP 1305 P-1

          Polyphenylene sulfide

          30% glass fiber reinforced

          RTP Company

          product manual:

          Glass Fiber
          RTP 1305 P-1 Physical Properties
          Basic Information
          Filler / reinforcement
          • Glass fiber reinforced material, 30% filler by weight
          RoHS compliance
          • Contact manufacturer
          processing method
          • Injection molding
          Physical properties Rating Unit system Test Methods
          proportion 1.58 g / cm³ ASTM D792
          Shrinkage-Flow (3.20 mm) 0.10 to 0.30 % ASTM D955
          Water content 0.040 %
          Additional information Rating Unit system
          Primary Additive 30 %
          Mechanical behavior Rating Unit system Test Methods
          Tensile modulus 12400 MPa ASTM D638
          tensile strength 159 MPa ASTM D638
          Elongation (yield) 1.8 % ASTM D638
          Flexural modulus 11700 MPa ASTM D790
          Bending strength 214 MPa ASTM D790
          Impact performance Rating Unit system Test Methods
          Notched Izod Impact Strength (3.20 mm) 80 J / m ASTM D256
          Unnotched Izod Impact (3.20 mm) 480 J / m ASTM D4812
          Thermal performance Rating Unit system Test Methods
          Thermal deformation temperature under load (1.8 MPa, unannealed) 266 ° C ASTM D648
          Flammability Rating Test Methods
          UL flame retardant rating (1.50 mm, ** Values per RTP Company testing.) V-0 UL 94
          injection Rating Unit system
          Drying temperature 149 ° C
          Drying time 6.0 hr
          Processing (melt) temperature 307 to 329 ° C
          Mold temperature 135 to 177 ° C
          Injection pressure 68.9 to 103 MPa

          Dear, if you want a PDF property list, you can download it in the property download section, or send an email to: tjh@rjplastics.com to request!
          Reminder: Renjie company provides free technical support for plastic raw materials injection molding for 24 hours. Consultation hotline: 18681139818, contact person: Tang Sheng
          Tag: PPS , 1305 , P-1